Shell Creek Game Calls now takes credit cards over the phone!
Double Down Stake System
Dealer Inquiries Welcome
This stake system offers you two advantages, movement and concealment. Movement in the spread is key to your success. The Flapping Flyer by
Sillosocks is perfect for this system. This Stake allows you to fly two Flapping Flyers. The two Flyers are mounted in the stake one above the
other simulating geese or ducks dropping into the flock. Concealment is increased by placing these stakes close to and around the blinds. This
system comes complete with all poles and hardware; just add two of your favorite Flapping Flyers.
It may benefit you to spray paint the poles a preferred camouflage color to match the area you're hunting. Put the two 4 foot 3/8 fiberglass poles
together this gives you an 8 foot pole. Mount your decoy to the 3/8 to 1/4 adapter on the end of the now 8 foot 3/8 fiberglass pole. The longer 3/8
pole is to be placed into the highest receiver on the stake. Install the 4 foot 1/4 or smaller fiberglass pole in the lower receiver on the stake.
Add your Flyer to the 1/4 pole and you are ready. The Double Down Stake System Base has bearings that when the high and low poles somewhat fight each
other in the wind and create a realistic side to side up and down and around motion like real birds. The Double Down Stake System can be used
in water by simply mounting it in a 1/2 conduit pole just above the water level. Decoys Sold Separately.
SilloSock Flapping Snow Goose Decoy
A great addition to your snow goose spread. Able to perform in light to heavy wind. A must have for their great, realistic movement.
New improved printing and fiberglass mounting pole are now included. This decoy has been proven deadly on our Snow Goose hunts. Used
on a short fiberglass pole alone, or installed in The Stalker Machine Above, these Flyer Decoys are a must for any hunter.
SilloSock Flapping Canada Goose Decoy
A great addition to your Canada goose spread. Able to perform in light to heavy wind. A must have for their great, realistic movement.
New improved printing and fiberglass mounting pole are now included. This decoy has been proven deadly on our Canada Goose hunts. Used on
a short fiberglass pole alone, or installed in The Stalker Machine Above, these Flyer Decoys are a must for any hunter.
Flyer Pole End
Pole End Cap can be glued onto a 3/8" fiber or steel rod. This part is CNC machined out of aluminum with a 3/8" hole on one end and a
1/4" post on the other end. This end cap will be helpful when mounting your flyer type decoys on a stiffer pole to get them higher in the air.